ALB-DR10 The single-phase AC load with pure resistive load; it can simulate all kinds of power load, meet the power unit, UPS power supply, inverter AC power full load detection is needed, production workshop, laboratory, installation and debugging, research and development necessary detection tools.
The main engine has temperature overheating automatic alarm protection function: due to special reasons, when overheating occurs, it can automatically cut off the load.
The whole machine is composed of resistive load. The load adopts energy dissipation method, and the heat dissipation adopts forced air cooling mode.
The fan adopts small axial flow fan, which has the characteristics of large air flow, good heat dissipation and low noise.
The above features make the whole machine better than imported products in safety, reliability and noise reduction.
Two, technical parameters
1 , rated input voltage single-phase 220V
2. Rated input power 10KW
3, power sub file 100W/200W/200W/500W/1KW/2KW/2KW/5KW (can be customized according to customer requirements)
4. Power factor PF=1
5 , load accuracy + 5%
6, the explicit mode has voltage and current meter real-time display (optional)
7 , work power supply single-phase AC220V/50HZ
8 , control panel, manual control, sectional manual adjustable.
9 , insulation grade F
10, protection level IP20 (for indoor use)
11 fan noise 65 decibels
12 , cooling mode forced air cooling: side inlet air, side wind
13, work mode can work continuously
14 , protection function, over temperature alarm, over temperature protection, buzzer prompt, over-current protection, etc.
15, external size host: wide 450*, deep 570*, high 770mm
16. Apply environmental temperature -10 DEG C to +50 centigrade
17, the use of mobile style load universal casters, 2 before and after each
18, relative humidity is less than 95%
19, less than 2500 meters altitude
|
|
Single phase AC load bank switch test load Images
|
